This is the NEW Digital Peak Charger by Duratrax.

*** Five-Year Warranty ***

FEATURES: AC/DC convenience is great for use at home or at the track
Peak charges 1-8 NiCd or NiMH cells.
Peak charge current adjustable from 0.1 to 5A (3A with AC)
Two-line, 16-character LCD display for easy programming and data
display
Displays battery voltage, peak detection mV, charge time, current,
and capacity
Adjustable peak detection sensitivity or "threshold" from 3mV-20mV,
to custom match the charger to specific batteries
Automatic charge mode changes if specific setting are not pre-set
Selectable TRICKLE charge rates - 0, 100mA, 200mA
Displays errors for improper input voltage, poor battery connections,
and reverse polarity on the output
Store pre-set charge parameters in memory for 10 battery types
Multiple sound cues and melodies
Microprocessor controlled intelligence and reliability
Solid State reverse polarity and short circuit protection on
input and output


INCLUDES: One charger
One Battery Lead (Kyosho Connector)
One Instruction Packet

REQUIRES: Power Source

SPECS: Input Voltage: 110V AC 60Hz, 11-15V DC
Cell Types: NiCd and NiMH
Cell Count: 1-8
Peak Charge Rate: 0.1- 5.0 A (3.0A with AC power source)
Charge rate increments: 0.1A (100mA)
Fast charge termination: zero delta peak (3 - 20mV/Cell)
TRICKLE charge rates: 0, 100mA, 200mA Selectable
Output connectors: spring-loaded terminals

Case Size: 5"x3.4"x5.5" (127x86x140mm)
Weight: 2.94 lb (1335g)

COMMENTS: This is a linear charger.
The DuraTrax 12V Switching Power Supply (DTXP4300) will work with
this charger and allow charging at the full 5A capability for
6 and 7 cell packs.